What Do You Do If Your Stihl Chainsaw Is Flooded – Let’s Find Out
Chainsaws can easily get flooded with fuel for several reasons, though it does not matter if they are of Stihl’s chainsaws or any other.
Chainsaws can get flooded mainly when energy, along with air, gets accumulated in the engine due to extra pressure that puts on the machine while trying to start it up. Usually, when this does not happen to your Stihl chainsaw, you may think, what do you do if your Stihl chainsaw is flooded?
Well, no worries, now; Surferhandy will cover all the possible solutions you should try on your chainsaw if it gets flooded with fuel. Stihl has high-quality chainsaws containing a choke for the engine’s cold start.
When the choke is pulled while starting, there is a combustion chamber sprayed by the carburetor.
If the engine gets started quickly, this will not cause an issue, but when machining takes three to four tries to start, the fuel accumulates in the engine along with the air, which makes fuel extra rich and causes flooding in the machine.
What Do You Do If Your Stihl Chainsaw Is Flooded
What do you do if your Stihl chainsaw is flooded? This concerns every chainsaw user who has yet to witness this situation and wants the correct solution to cope with this emergency.
Several ways to deal with the issue should be done: remove the spark plug and make the electrodes clean, remove the air filter, or clean it up and try to start up the engine again and again to clear the fuel that has accumulated inside it. Read the article below to learn more about dealing with the issue.
Steps To Clear The Fuel Flooded Chainsaw
Stihl chainsaws have been seen to create problems with fuel in the last few years, but this is not the big case.
At times, the chainsaw gets flooded due to fuel accumulation in the engine, which can be resolved by waiting for the fuel to drain on its own, or several other steps could be taken to resume the engine services quickly. Below is the overview of different methods which could be used to solve the issue of a flooded chainsaw;
- Remove the spark plug either manually or with the help of a wrench; for this purpose, position the saw on the surface and double-check if the chain brake is active. After removing the spark plugs, clear all the fuel from the electrodes properly.
- Clean the air filter, and this can be done by removing the cover of the air filter.
- Clear fuel from the combustion
chamber by starting the saw three to four times; this should be done by opening the choke of the saw
- The air filter and spark plug should be replaced by opening the choke and starting the cord many times.
- To complete above task, gloves, spark plug wrenches, and rags must be available to complete the job.
FAQs
The engine can be cleaned by removing the air filter or making it clean by throwing away all the dirt, pulling the sparking plug, and cleaning the electrodes.
Some essential accessories are required to clean the spark plug, including gloves, a spark plug wrench, and a rag.
Yes, fuel can drain automatically from the engine, but this may take some extra time which can be bothersome for the user as this would also stop the user’s work.
No, there is no issue, though this can clean the engine faster than waiting for the fuel to come out automatically. However, self-cleaning should be done with extra care.
Conclusion
After reading the above article, what do you do if your Stihl chainsaw is flooded? A conclusion can be drawn that this issue can be resolved by waiting for the fuel to drain automatically or by self-cleaning following the above mentioned methods.
Chainsaw gets flooded due to the choking feature, which also gives numerous benefits. The choking quality is a premium but should be used carefully; otherwise, the engine can get flooded with fuel.
In sharing his knowledge, Brayden aims to guide individuals and professionals alike through the complexities of managing land and effectively using machinery. His insights are practical, borne out of hands-on experience, and cover a spectrum of scenarios in land management. More about me
