Husqvarna Weed Eater Pull Cord Not Catching (Guide)

Weed eaters are undoubtedly one of the most helpful gardening tools and come in handy, especially when a gardener has to maintain the grass and pluck out all weeds. The automatic machine does the entire task sole-handily and, as an outcome, leaves the grass leveled and cleaned. 

In the market, Husqvarna is popularly known for manufacturing not only the most reliable but also the most versatile kind of weed eaters that come in with a range of functions to offer such as an excellent voltage of current to aid you in powering through all your work tasks and getting them done just within the right amount of time.

However, despite the promised reliability, weed eaters can sometimes be problematic because the Husqvarna weed eater pull cord is not catching current. This issue with the machine can hinder the entire work process, so let’s find out adequate measures to deal with it. 

Why Husqvarna Weed Eater Pull Cord Not Catching

Many reasons can be the originating cause for your Husqvarna Weed eater pull cord not catching current. They can range from serious issues to those that you can solve easily and without any inconvenience.

Below in this section, we list why Husqvarna weed eater pull cord is not catching power. 

Pull Cord Is Broken 

For instance, if you have continuously used your Husqvarna weed eater and have had the machine under your ownership for a year or a similar span, then there is a likely chance that the pull cord has broken.

You are not to blame here, but this is how the function goes by. Due to being exposed to consistent use, some components of the Husqvarna weed eater tend to wear out; in this case, it’s the pull cord for you. 

Now there are variances in the breaking of the pull cord too. Some users report that when the cord breaks, it detaches itself from the system. In contrast, other users have accounted for their broken pull cord being tangled up within the internal system of their Husqvarna weed eater.

Pull Cord Is Stuck 

Several causes can form the basis for the pull cord of your Husqvarna weed eater being stuck most of that problem face on Husqvarna 128ld & Husqvarna 525l weed eater. The pull cord can get stuck in the machine because we just mentioned- it is broken. Since the broken cord cannot bring itself out of the weed eater, it can get stuck within some particular machinery component. 

The situation can be vice versa too, whereby the pull cord has been first stuck or lodged into a part of the weed eater and then has broken. There is also a possibility of a breakdown of the coil system regulating the pull cord, which is no longer catching power from the engine. 

Usually, a coil system in your Husqvarna weed eater will stop delivering its functions due to a massive buildup in the adjacent components. This happens because an excessive number of weeds from your previous cutting task have now housed themselves in the system. 

Recoil Spring Is Damaged 

husqvarna recoil spring is an essential component of the Husqvarna weed eater, ensuring that the machine user can rightfully pull on the cord to get it started and working. The spring in the weed eater is also responsible for recoiling the pull cord into a nice and clean circle after it has been utilized. 

In the scenario where the recoil spring is damaged, it fails to perform its role, and as an outcome, the Husqvarna weed eater pulls the cord, not catching power results. When the spring is not recoiling the cord, the pull cord will be challenging to get ahold of, and even if you do, it will not lead to the weed eater starting.

Exhaust Buildup & Bad Fuel 

Although issues with the Husqvarna weed eater’s pull cord likely arise out of the problems within the operating mechanism, there can be other reasons, too, such as a chance for there to be a buildup in the exhaust or the fuel can be to blame. Let’s see how!

Every time you pull at the cord, you perform the manual work of stimulating combustion within the installed engine in the Husqvarna weed eater. Combusting an engine involves multiple parts moving simultaneously, and supposedly if the fuel in the tank is of poor quality, it will not result in ignition. 

In another alternative scenario, with a build-up in the exhaust system, ignition will also not happen inside the engine. Therefore, making it difficult for you to pull at the cord and for it to catch power. 

As the design of the engine undergoing combustion has been designed to provide safety, with bad fuel or an exhaust buildup, the engine will not ignite, and the weed eater, per its design, is going to resist any movement that can happen with the pistons leading to the opening and closening of the chambers for combustion. 

Moreover, due to the chambers being attached to the piston, which is subsequently linked to the pull cord, resistance will also be added to the cord, making it harder to pull at. 

Troubleshooting the Weed Eater 

We have explored all the possible causes for the Husqvarna Weed eater pull cord not catching power.

Still, now it’s time we devise adequate solutions to be implemented. However, before you try implementing the solution to problem solve the issue, you must identify the originating cause for the pull cord not catching. 

Some of the remedies you can resort to for solving the listed reasons are the following:

Fix a Broken/ Stuck Cord.

Whenever problem-solving is narrowed down to fixing something, there are two options that every user has, and they can choose accordingly. You can repair the damaged or broken cord or get it replaced.

The option that seems the most appropriate for you can be determined by the condition that the pull cord is in. if you think that the pull cord for your Husqvarna weed eater has deteriorated in its condition beyond the extent of being fixed, then the plausible thing to do would be to replace it. 

Fortunately, replacement of the pull cord is not expensive, and the pull cord is easily and readily available in the market. Purchasing a good quality pull cord is ideal as it will be durable and will work for a long time without any issues with its functioning. 

Also, if you cannot do the replacement yourself, ask a mechanic to do it for you- this is not costly!

But if you can have another way around for using the pull cord without getting it replaced and instead fixing the breakages it has on the surface, go ahead with giving it a trying attempt!  

Cleaning The Coil

Cleaning the coil and making it weed-free is very convenient. The procedure requires you to have adequate knowledge of using a screwdriver to unfasten all the outer coverings to access the coil.

Once accessed, clean the coil attentively and pluck out any weed links that might have been stuck into it cautiously. 

Removing Buildup From The Exhaust 

Similar to cleaning the coil removing buildup from the exhaust is also an easy thing to do. You will have first to uncover the exterior of the Husqvarna weed eater to retrieve the exhaust system. 

When you have acquired the exhaust, use an air dryer and blow its wind into the exhaust. This blowing of wind will automatically squeeze out any dirt instilled in the exhaust from every nook and cranny.

Moreover, you must always look out for the type of fuel that you are using to refill the fuel tank. Not every fuel composition is suitable for weed eaters with a low withstand threshold against unsuitable ratios. 

Frequently Asked Questions 

Conclusion 

In this guide on Husqvarna weed eater pull cord not catching. We have provided you with a range of reasons for why the problem might be occurring, alongside assisting you with solutions, hoping it helps!