Why Won’t My Poulan Chainsaw Start- Reasons, Causes, And Easy Fixes!

Getting started to work, but why won’t my Poulan chainsaw start? You tried several times, but still, the issue persists.

Don’t worry! The problems lie with your starting mechanism; however, which parts seem functioning has yet to be discovered.

So, for that, you need to go in-depth and find out the possible cause of the chainsaw.

Husqvarna chainsaws like Poulan seem stop be one of the great chainsaws providing power, efficiency, and better performance, but when it comes to starting issues, it’s important to troubleshoot else; you need to stop the work that can be devastating most of the time to save time,

and energy and let you set the chains back to work review the problems for chainsaw not starting with best fixes to make it set in no time.

Why Won’t My Poulan Chainsaw Start- Quick answer!

I tried several times, but the Poulan chainsaw needs to start. The issues might be a damaged, dirty carburetor, fueling problems (bad, wrong, or old fuel), damaged or clogged fuel filter, clogged fuel lines, the issue with the spark plug, ignition coil, etc., or both.

More of a loose chain, damaged or worn-out pistons, and rings, or poor recoil start will prevent the engine from starting and running.

The recoil starter has several parts, and damage to pulleys, ratchet, and others would prevent the chainsaw from starting. But wait! Want to know more deals with fixes? Check out the next section.

Common Reasons For Poulan Chainsaw to Not Start- Reasons with Fixes!

Poulan Chainsaw is Not Starting
Problem	Reasons/cause	Solution
Spark plug	Damaged, burnt, worn out, or dirty	Replace the spark plug
Gasoline (fuel)	Bad, wrong, old	Add fresh gasoline
Fuel oil mix	Wrong ratio	Go with 40:1 or 50:1
Fuel filter	Damaged or clogged	Replace and clean
Fuel lining	Clogged or broken	Replace
Ignition coil	Damage	Replace
Carburetor	Damaged, dirty, or worn out	Clean it, or else replace it with new
Gas caps	Loose gas caps	Tighten the cap
Recoil starter	Damaged pulleys, jammed ratchet, faulty cords, damaged springs	Replace the damaged parts, tighten the pulleys
Chain	Loose	Tighten it
Muffler	Clogged muffler, carbon build-up	Please clean it
Rewind spring	Damaged or worn out, unable to wind	Replace
Crankshaft	A damaged crankshaft causes no piston to turn.	Replace or fix
Combustion chamber Pistons and rings	Worn out or loose rings and positions	Replace or tighten to secure the chamber

Check Out The Spark Plug

Problem

Damaged, worn out, or dirty spark plug causing no ignition and poor startup

Reasons and causes

If your chainsaw isn’t starting easily, then it means that it has a damaged, worn-out, or burnt spark plug that isn’t igniting the fuel-air mixture to let the chainsaw easily start; sometimes the spark plug may get flooded, and that’s another reason that prevents chainsaw from starting because it is wet fouled and contain moisture affecting the electrodes and not letting the engine to start properly.

In addition, the high carbon build-up will prevent your spark plug from igniting the fuel, leading to difficulty starting up the chainsaw.

Troubleshoot

To know whether the spark plug is worn out, try pulling the cord 15 times. After 15 times, it still does not start, and the issue is the spark plug.

Fix

• Replace the damaged one
• Clean the dirty spark plug

Check Out Fueling

Problems

Wrong, bad, or less fuel, wrong fuel oil mix, damaged or blocked fuel line, damaged or clogged fuel filter leading to the poor startup of chainsaw

Reasons and causes

if your change so isn’t starting, then the second reason can be issued with your fuel system either the fuel is not provided to the to get ignited or there might be blockage with the few line filter might be damaged or not working properly moreover a bad wrong and let’s view me also be the causative agents for not letting your change so to start properly.

Troubleshoot 

Check out the gas oil mix; if it is old, 60 days, then the issue might be with the fuel. Always concern the exact ratio of 40:1 or 50:1 of fresh gasoline and oil to ensure a good startup.

Check if the fuel filter is damaged or dirty. If anyone exists or both, you would find clogs and build-up that prevent the fuel from flowing.

You added fresh fuel, but still, a gas smell occurs when you start the. Fuel might have flooded. Try removing the excess.

Fix

• For wrong, bad or old fuel, replace it with fresh
• Go for exact ratios of oil-gas mix
• Replace or clean the fuel filter
• Clean the clogged fuel lines or replace them.

Check Out The Carburetor

Problem

Dirty, damaged, or worn-out carburetor

Reason and causes

An issue with the carburetor is one of the most common reasons for your Poulan chainsaw not to start.

For that, you need to check whether your carburetor is vapor locked; if yes, then the fuel won’t flow in the carburetor; there is no ignition, and ultimately difficulty in chainsaw startup.

In addition, a dirty carburetor or damaged one can behave similarly, not letting the chainsaw start. When the gas cap is loose, the vapor lock prevents the fuel from flowing, and again, there is no engine startup.

Fix

• Clean the dirty carburetor
• Replace the damaged one
• Tighten the gas cap
• Maintaining the chainsaw if used after a year of storage.
• Clean the air filter

Check Out Ignition Coil

Reasons and causes

If the spark plug is fine, still no ignition occurs, then the issue is with the ignition coil.

The ignition coil works to add the spark to ignite the fuel, and any default or problem with the starter coil lets the fuel neither ignite nor run the engine. Check both the spark plug and ignition coil to troubleshoot.

Fix

• Clean or replace the sparkplug
• Replace the ignition coil

Check Out The Recoil Starter

Problem

Fail engagement of crankshaft leading to no startup

Reason and causes

For the easy start of the engine, it’s pivotal that the recoil starts engaging the chainsaw crankshaft; if it does, then the engine won’t start, and no startup of the chainsaw occurs.

The engagement occurs through the recoil start pulley, so any loose, damaged, or worn-out pulley makes sense to be the cause for problems.

In addition, other parts like damaged springs, faulty cords, and jammed ratchet are also the common causative agents for failed engagement leading to not starting the chainsaw.

Troubleshoot

Check out the recoil state parts and pulleys and observe any damage, dirt, or jammed parts. Upon pulling the cord, the pulley isn’t starting. Then the issue is with the pulley. If found loose or damaged, go for the fix.

Fix

• Replace the damaged starter
• Secure the loose belts
• Replace the damaged pulley
• Replace the damaged cords and springs
• Un-jammed the ratchet

Check Out The Piston And Rings

Problem

Pistons and rings, when worn out, lead to no startup

Reason and cause

Pistons secure the combustion chamber and properly seal it, but when the seals are worn out, loose, or damaged, there are chances that the combustion chamber will not work properly, resulting in a poor startup.

If the entire piston seems damaged, it won’t cause the engine to start.

Fix

• Replace the piston and rings
• Tighten the rings

FAQs

Final Thoughts

Despite the Poulan chainsaw’s durable build-up and excellent performance with overtime usage or after the warranty period, there might be issues like why won’t my Poulan chainsaw start? For knowing what causes poor start, our handy guide is the best solution to faulty chainsaw start ensuring better troubleshooting a fixing with ease.

The best you can do you using fresh gasoline, the correct fuel-oil ratio, timely maintenance, and not use it in harsh conditions beyond its capacity.

Follow the guidelines and service it monthly to let it get those firewoods or hardwoods cut with ease, perfection, and low effort.